<object id="w5uw2"></object>
    1. <object id="w5uw2"></object>

        歡迎進入蘇州杰威爾精密機械有限公司官網,我們將竭誠為您服務!

        您當前的位置:首頁 > 產品中心 > 模具

        板材模頭系列

        采用雙流道設計,上下模唇可調并帶有模唇油溫控制,所生產制品表面結皮效果好,內應力小,真正實現表面結皮 發泡。制品厚度5-30mm。

        詳情

        JW-B-C1

        標準衣架式流道設計,. 上模唇采用推拉式或推出式微調,下模唇可換,調節范圍最大達5mm,適用生產PC、PMMA、GPPS、PET.等單層或多層高透明片材或板材。,

        Standard coat-hanger design, the upper die lip adjusting adopts the push- pull type or push- out fine- tuning type,thelower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA,GPPS, PET, single-layer or multi-layer high transparent sheet or plate

        JW-B- A2

        重型模頭采用標準衣架式流道設計,上模唇可調、下模唇可換及45度調節阻流棒調節裝置,能夠滿足不同厚度制品的需求。適用生產寬度在2000mm以下,厚度3-30mm的ABS、PE、PP厚板。

        With special coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45° blocking bar, thedie adapt to ABS, PE, PP thick plate with the width below 2000mm and thickness between 3- -30mm.




        詢價

        蘇州杰威爾精密機械有限公司    

        DSaRwC6/4B5k5dvjMvtxWYzFQI9dI0NKQutxZbD/J15R9wrfyMnITMmybWzwkfAS+W9DLhDu2uqYBp3F+xbQgYCXfThx0uPpQ2CYZcf9EVDtw5hxGJweCrA4ffpI4LGL 俺去电影网
          <object id="w5uw2"></object>
          1. <object id="w5uw2"></object>